The Aquabelle collection of chandeliers is made of hand-blown glass and consists of components that flow synchronized in the air, like fish swimmming under the sea surface. Air bubbles are trapped in the glass components, in which the light is beautifully refracted and reflected into the space. The combination of light with warm honey shades makes the chandelier literally shine.

The Aquabelle collection is available in two colors – in shades of honey or gray. Both colors are complemented and softened by the use of crystal clear glass components.

Chandeliers are supplied either with metal base, which is also suitable for concrete ceilings, or without a base (plasterboard ceilings). In this case, thin cables with glass components protrude directly from the ceiling. Thanks to this, the chandelier acquire another dimension, as it acts as an integral part of the entire interior, tailor-made.

GENERAL SPECIFICATION

Metal base: polished stainless stee / white matt / no base

Base dimensions: 1480 x 700 x 40 mm (length x width x hight)

Glass components: hand-blown glass                                                                                

Components dimensions: lenght 140 mm

Color version:  amber + crystal / gray + crystal   

Components attachment: thin stainless steel cables                                                      

Components suspension: optional, min. 400 mm                         

TECHNICAL SPECIFICATION

Input voltage: 230V AC / 50-60 Hz                                                                     

Light source: 15 x LED spotlight DIAN     

Color temperature: 6000K / 4000K / 3000K

Power consumption: 90W

Operative lifetime: 50 000 hours    

Dimming: yes (control not included)                                                

Protection: IP20                                                                                                       

Operating temperature: - 10 to 50 °C                                              

Power cable: no

Aurora carries the feeling and precision of the glass craft. Irregular cuts of modern shapes are created on the hand-ground shade. This elegant design element is ideal for lighting bar counters and kitchen islands.  

The lamp sdades are available in 3 versions – crystal, champagne and amber. As standard, it is supplied with a 2 m suspension cable. On request, it is possible prepare lamps with atypical lenghts and develop a proposal for their replacement.

Installation:

The lamp grip is suitable only for installation in the plasterboard. It can not be installed in the existing plasterboard ceiling, because you need to glue the counter piece to the ceiling grip from the opposite side of the plasterboard.

GENERAL SPECIFICATION

Shade: hand blown-glass

Shade color: crystal / champagne / amber

Shade dimensions: ø 220 mm, height 300 mm

Ceiling grip finish: polished stainless steel / golden gloss / white matt

Ceiling grip dimensions: ø 16 mm, height 22 mm

Lamp suspension: silver Teflon cable, ø 3 mm

Weight: 3 kg                                                                                             

Protection: IP20                                                                                                       

Operating temperature: - 20 to 60 °C

TECHNICAL SPECIFICATION

Input voltage: 24V DC                                                                           

Power consumption: 5W  

Light source: LED modul brand CREE                                                                                

Operative lifetime: 50 000 hours                                                       

Colour temperature: 6000K / 4000K / 3000K                                                                  

Dimming: yes (control not included)

Power cable: yes

Aurora carries the feeling and precision of the glass craft. Irregular cuts of modern shapes are created on the hand-ground shade. This elegant design element is ideal for lighting bar counters and kitchen islands.  

The lamp sdades are available in 3 versions – crystal, champagne and amber. As standard, it is supplied with a 2 m suspension cable. On request, it is possible prepare lamps with atypical lenghts and develop a proposal for their replacement.

Installation:

The lamp grip is suitable only for installation in the plasterboard. It can not be installed in the existing plasterboard ceiling, because you need to glue the counter piece to the ceiling grip from the opposite side of the plasterboard.

GENERAL SPECIFICATION

Shade: hand blown-glass

Shade color: crystal / champagne / amber

Shade dimensions: ø 200 mm, height 160 mm

Ceiling grip finish: polished stainless steel / golden gloss / white matt

Ceiling grip dimensions: ø 16 mm, height 22 mm

Lamp suspension: silver Teflon cable, ø 3 mm

Weight: 2 kg                                                                                             

Protection: IP20                                                                                                       

Operating temperature: - 20 to 60 °C

LED module temperature: 40 °C                                      

TECHNICAL SPECIFICATION

Input voltage: 24V DC                                                                           

Power consumption: 5W  

Light source: LED modul brand CREE                                                                                

Operative lifetime: 50 000 hours                                                       

Colour temperature: 6000K / 4000K / 3000K                                                                  

Dimming: yes (control not included)

Power cable: yes

Aurora M

Aurora carries the feeling and precision of the glass craft. Irregular cuts of modern shapes are created on the hand-ground shade. This elegant design element is ideal for lighting bar counters and kitchen islands.  

The lamp sdades are available in 3 versions – crystal, champagne and amber. As standard, it is supplied with a 2 m suspension cable. On request, it is possible prepare lamps with atypical lenghts and develop a proposal for their replacement.

Installation:

The lamp grip is suitable only for installation in the plasterboard. It can not be installed in the existing plasterboard ceiling, because you need to glue the counter piece to the ceiling grip from the opposite side of the plasterboard.

GENERAL SPECIFICATION

Shade: hand blown-glass

Shade color: crystal / champagne / amber

Shade dimensions: ø 220 mm, height 300 mm

Ceiling grip finish: polished stainless steel / golden gloss / white matt

Ceiling grip dimensions: ø 16 mm, height 22 mm

Lamp suspension: silver Teflon cable, ø 3 mm

Weight: 3 kg                                                                                             

Protection: IP20                                                                                                       

Operating temperature: - 20 to 60 °C

LED module temperature: 40 °C                                      

TECHNICAL SPECIFICATION

Input voltage: 24V DC                                                                           

Power consumption: 5W  

Light source: LED modul brand CREE                                                                                

Operative lifetime: 50 000 hours                                                       

Colour temperature: 6000K / 4000K / 3000K                                                                  

Dimming: yes (control not included)

Power cable: yes

The collection of Bubble Hemisphere chandeliers is suitable for modern as well as classical interiors. Hand-blown bubbles give the impression of floating in the air. In their production, a special glassmaking technique was used, creating fine cracks on the surface, in which the light refracts beautifully. When lit, the chandelier seems to come alive and resembles the shining sun.

Chandeliers are supplied either with metal base, which is also suitable for concrete ceilings, or without a base (plasterboard ceilings). In this case, thin cables with glass components protrude directly from the ceiling from small gripers. Thanks to this, the chandelier acquire another dimension, as it acts as an integral part of the entire interior, tailor-made.

GENERAL SPECIFICATION

Metal base: polished stainless stee / white matt / no base

Base dimensions: ø 1100 mm, height 40 mm

Glass components: hand-blown glass                                                                                

Components dimensions: ø 40, 60, 80 and 100 mm

Color version:  amber + crystal

Components attachment: thin stainless steel cables                                                      

Components suspension: optional, min. 600 mm                         

TECHNICAL SPECIFICATION

Input voltage: 230V AC / 50-60 Hz                                                                     

Light source: 12 x LED spotlight DIAN            

Color temperature: 6000K / 4000K / 3000K

Power consumption: 72W

Operative lifetime: 50 000 hours    

Dimming: yes (control not included)                                                

Protection: IP20                                                                                                       

Operating temperature: - 10 to 50 °C                                              

Power cable: no

Elegance and luxury best describe the lamps from the Crystella collection. Crystella Wall is a wall lamp that shines in both directions, which projects effective rays on the wall.

The beauty of lamps stem from the use of thousands of tiny crystals that reflect light in unique ways, creating a sparkling effect. The marking "Made with crystals from Swarovski" on the product confirms that this jewel was made with authentic Swarovski crystals. The choice of high-quality crystals further enhance the luxurious feel of the lamp.

The wall lamp is available in 3 heights – 500, 600 and 700 mm.

TIP: Crystals stand out best with a cool white light source.

GENERAL SPECIFICATION

Base: polished stainless steel / golden gloss

Glass components: tubes filled with Swarovski crystals                                                                                  

Lamp height: 500 mm / 600 mm / 700 mm

Lamp width and depth:  220 and 110 mm                                                                       

Protection: IP20                                                                                                       

Operating temperature: - 10 to 50 °C                                                              

TECHNICAL SPECIFICATION

Input voltage: 230V AC / 50-60 Hz                                                                     

Light source: 2 x LED module brand SEOUL                   

Power consumption: 8W  

Operative lifetime: 50 000 hours                                                       

Color temperature: 6000K / 4000K / 3000K                                                   

Dimming: no

Power cable: no

Dian is a spotlight with small dimensions and high luminosity considering its size.

The lamp is available in 3 versions – polished stainless steel, golden gloss and white matt.

There are 2 light angles to choose from – 15° and 40°. Thanks to the narrow light beam, the lamp is suitable for highlighting special design elements in the interior or wherever its minimalist design is suitable.

GENERAL SPECIFICATION

Visor: polycarbonate, 15° / 40° optics

Body: aluminium, stainless steel

Cover: polished stainless steel / golden gloss / white matt

Dimensions: ø 46 mm                                                           

Weight: 0,1 kg                                                                                          

Protection: IP41                                                                                                         

Operating temperature: - 20 to 60 °C

Lamp temperature: 40 °C                                   

TECHNICAL SPECIFICATION

Input voltage: 12V DC                                                                             

Power consumption: 6W (CW / NW / WW)                    

Light source: LED modul brand CREE                                                                                    

Operative lifetime: 50 000 hours                                                        

Light color: 6000K / 4000K / 3000K                                                    

Dimming: yes (control not included)

Power cable: yes 

The Fagus is intended for installation in the ceilings of houses and other outdoor objects. However, it also finds its place in modern interiors. It is very suitable for lighting bathroom or SPA areas where humidity is high.

The light is equipped with a diffused polycarbonate visor with a 180° radiation angle and a cover in 3 versions – polished stainless steel, golden gloss and white matt.

GENERAL SPECIFICATION

Visor: polycarbonate – opal

Body: aluminium, stainless steel 

Cover: polished stainless steel / golden gloss / white matt

Dimensions: ø 105 mm                                                        

Weight: 0,5 kg                                                                                          

Protection: IP65                                                                                                         

Operating temperature: - 30 to 120 °C

Lamp temperature: 45 °C                                    

TECHNICAL SPECIFICATION

Input voltage: 24V DC                                                                             

Power consumption: 11W (CW / NW / WW / RGB), 16W (RGBW)                              

Light source: LED modul brand CREE                                                                                    

Operative lifetime: 50 000 hours                                                        

Light color: 6000K / 4000K / 3000K / RGB / RGBW                                                       

Dimming: yes (control not included)

Power cable: yes                                   

Optic fibre sets offer an ideal solution for the creation of your own piece of starry sky.

They serve for decorative illumination of interior spaces such as bedrooms, bathrooms, living rooms, wellness resorts, saunas, bars and restaurants. They are suitable for application onto plasterboard ceilings or chipboards.

A set consisting of 230 fibers is suitable for application on a surface with parameters 2 x 1 m. 

Optic starry sky contains:

230 optic fibres with 3 different diameters

LED projector OP2, 12V

power supply

RGB (RGBW) controller in case of multicolour version

drills

glue

printed paper templates (optional)

Structure of optic fibers 

Length of 2 m – ø 0,75 mm – 100 pcs.

Length of 2 m – ø 1,00 mm – 10 pcs.

Length of 2 m – ø 1,50 mm – 5 pcs.

Length of 3 m – ø 0,75 mm – 100 pcs.

Length of 3 m – ø 1,00 mm – 10 pcs.

Length of 3 m – ø 1,50 mm – 5 pcs

TIP: 

You can add more variety to your starry sky via a combination of the CW (WW) projector with the RGB (RGBW) projector. We recommend connecting 70% of optic fibers to the CW (WW) projector and 30% of optic fibers equally selected from the whole surface to the RGB (RGBW) projector. What you need to do is to purchase one complete RGB (RGBW) set and one individual CW (WW) projector. It is recommended to select the CW projector instead of the WW projector in order to achieve a more realistic image.

A fancy effect can also be achieved via a combination of the optic and the crystal starry sky variant. The LED Crystal collection comes with various lights manufactured with authentic crystals from Swarovski.

If the standard set does not fit your needs, a customized set can be delivered. For this purpose, please send us the following information:

§  parameters of the room (area) where the starry sky is to be applied (length x width)

§  precise position of the service opening where the LED projector and the power supply are to be installed

§  optic set version (CW / NW / WW / RGB / RGBW)

We can also design and deliver a customized starry sky layout plan in the form of a printed paper template which can be easily mounted onto the ceiling in order to perform drilling.

TECHNICAL SPECIFICATION

Input voltage: 230V AC / 50-60 Hz

Power consumption: 5W (CW / NW /WW / RGB ), 6W (RGBW)

Light source: LED module made by CREE

Colour temperature: 6000K / 4000K / 3000K / RGB /RGBW

Operating temperature: - 20 to 120°C

Protection: IP65

Service lifetime: 50 000 hours

Dimming: yes (dimmer is not included)

Power cable: no

ACCESSORIES

Optic fibers, LED projector OP2 (CW / WW / NW / RGB / RGBW), power supply, glue, drills, RGB (RGBW) controller in the case of multicolour version, paper template (optional).

Optic fibre sets offer an ideal solution for the creation of your own piece of starry sky.

They serve for decorative illumination of interior spaces such as bedrooms, bathrooms, living rooms, wellness resorts, saunas, bars and restaurants. They are suitable for application onto plasterboard ceilings or chipboards.

A set consisting of 230 fibers is suitable for application on a surface with parameters 2 x 1 m. 

Optic starry sky contains:

230 optic fibres with 3 different diameters

LED projector OP2, 12V

power supply

RGB (RGBW) controller in case of multicolour version

drills

glue

printed paper templates (optional)

Structure of optic fibers 

Length of 2 m – ø 0,75 mm – 100 pcs.

Length of 2 m – ø 1,00 mm – 10 pcs.

Length of 2 m – ø 1,50 mm – 5 pcs.

Length of 3 m – ø 0,75 mm – 100 pcs.

Length of 3 m – ø 1,00 mm – 10 pcs.

Length of 3 m – ø 1,50 mm – 5 pcs

TIP: 

You can add more variety to your starry sky via a combination of the CW (WW) projector with the RGB (RGBW) projector. We recommend connecting 70% of optic fibers to the CW (WW) projector and 30% of optic fibers equally selected from the whole surface to the RGB (RGBW) projector. What you need to do is to purchase one complete RGB (RGBW) set and one individual CW (WW) projector. It is recommended to select the CW projector instead of the WW projector in order to achieve a more realistic image.

A fancy effect can also be achieved via a combination of the optic and the crystal starry sky variant. The LED Crystal collection comes with various lights manufactured with authentic crystals from Swarovski.

If the standard set does not fit your needs, a customized set can be delivered. For this purpose, please send us the following information:

§  parameters of the room (area) where the starry sky is to be applied (length x width)

§  precise position of the service opening where the LED projector and the power supply are to be installed

§  optic set version (CW / NW / WW / RGB / RGBW)

We can also design and deliver a customized starry sky layout plan in the form of a printed paper template which can be easily mounted onto the ceiling in order to perform drilling.

TECHNICAL SPECIFICATION

Input voltage: 230V AC / 50-60 Hz

Power consumption: 5W (CW / NW /WW / RGB ), 6W (RGBW)

Light source: LED module made by CREE

Colour temperature: 6000K / 4000K / 3000K / RGB /RGBW

Operating temperature: - 20 to 120°C

Protection: IP65

Service lifetime: 50 000 hours

Dimming: yes (dimmer is not included)

Power cable: no

ACCESSORIES

Optic fibers, LED projector OP2 (CW / WW / NW / RGB / RGBW), power supply, glue, drills, RGB (RGBW) controller in the case of multicolour version, paper template (optional).

Optic fibre sets offer an ideal solution for the creation of your own piece of starry sky.

They serve for decorative illumination of interior spaces such as bedrooms, bathrooms, living rooms, wellness resorts, saunas, bars and restaurants. They are suitable for application onto plasterboard ceilings or chipboards.

A set consisting of 230 fibers is suitable for application on a surface with parameters 2 x 1 m. 

Optic starry sky contains:

230 optic fibres with 3 different diameters

LED projector OP2, 12V

power supply

RGB (RGBW) controller in case of multicolour version

drills

glue

printed paper templates (optional)

Structure of optic fibers 

Length of 2 m – ø 0,75 mm – 100 pcs.

Length of 2 m – ø 1,00 mm – 10 pcs.

Length of 2 m – ø 1,50 mm – 5 pcs.

Length of 3 m – ø 0,75 mm – 100 pcs.

Length of 3 m – ø 1,00 mm – 10 pcs.

Length of 3 m – ø 1,50 mm – 5 pcs

TIP: 

You can add more variety to your starry sky via a combination of the CW (WW) projector with the RGB (RGBW) projector. We recommend connecting 70% of optic fibers to the CW (WW) projector and 30% of optic fibers equally selected from the whole surface to the RGB (RGBW) projector. What you need to do is to purchase one complete RGB (RGBW) set and one individual CW (WW) projector. It is recommended to select the CW projector instead of the WW projector in order to achieve a more realistic image.

A fancy effect can also be achieved via a combination of the optic and the crystal starry sky variant. The LED Crystal collection comes with various lights manufactured with authentic crystals from Swarovski.

If the standard set does not fit your needs, a customized set can be delivered. For this purpose, please send us the following information:

§  parameters of the room (area) where the starry sky is to be applied (length x width)

§  precise position of the service opening where the LED projector and the power supply are to be installed

§  optic set version (CW / NW / WW / RGB / RGBW)

We can also design and deliver a customized starry sky layout plan in the form of a printed paper template which can be easily mounted onto the ceiling in order to perform drilling.

TECHNICAL SPECIFICATION

Input voltage: 230V AC / 50-60 Hz

Power consumption: 5W (CW / NW /WW / RGB ), 6W (RGBW)

Light source: LED module made by CREE

Colour temperature: 6000K / 4000K / 3000K / RGB /RGBW

Operating temperature: - 20 to 120°C

Protection: IP65

Service lifetime: 50 000 hours

Dimming: yes (dimmer is not included)

Power cable: no

ACCESSORIES

Optic fibers, LED projector OP2 (CW / WW / NW / RGB / RGBW), power supply, glue, drills, RGB (RGBW) controller in the case of multicolour version, paper template (optional).

Optic fibre sets offer an ideal solution for the creation of your own piece of starry sky.

They serve for decorative illumination of interior spaces such as bedrooms, bathrooms, living rooms, wellness resorts, saunas, bars and restaurants. They are suitable for application onto plasterboard ceilings or chipboards.

A set consisting of 230 fibers is suitable for application on a surface with parameters 2 x 1 m. 

Optic starry sky contains:

230 optic fibres with 3 different diameters

LED projector OP2, 12V

power supply

RGB (RGBW) controller in case of multicolour version

drills

glue

printed paper templates (optional)

Structure of optic fibers 

Length of 2 m – ø 0,75 mm – 100 pcs.

Length of 2 m – ø 1,00 mm – 10 pcs.

Length of 2 m – ø 1,50 mm – 5 pcs.

Length of 3 m – ø 0,75 mm – 100 pcs.

Length of 3 m – ø 1,00 mm – 10 pcs.

Length of 3 m – ø 1,50 mm – 5 pcs

TIP: 

You can add more variety to your starry sky via a combination of the CW (WW) projector with the RGB (RGBW) projector. We recommend connecting 70% of optic fibers to the CW (WW) projector and 30% of optic fibers equally selected from the whole surface to the RGB (RGBW) projector. What you need to do is to purchase one complete RGB (RGBW) set and one individual CW (WW) projector. It is recommended to select the CW projector instead of the WW projector in order to achieve a more realistic image.

A fancy effect can also be achieved via a combination of the optic and the crystal starry sky variant. The LED Crystal collection comes with various lights manufactured with authentic crystals from Swarovski.

If the standard set does not fit your needs, a customized set can be delivered. For this purpose, please send us the following information:

§  parameters of the room (area) where the starry sky is to be applied (length x width)

§  precise position of the service opening where the LED projector and the power supply are to be installed

§  optic set version (CW / NW / WW / RGB / RGBW)

We can also design and deliver a customized starry sky layout plan in the form of a printed paper template which can be easily mounted onto the ceiling in order to perform drilling.

TECHNICAL SPECIFICATION

Input voltage: 230V AC / 50-60 Hz

Power consumption: 5W (CW / NW /WW / RGB ), 6W (RGBW)

Light source: LED module made by CREE

Colour temperature: 6000K / 4000K / 3000K / RGB /RGBW

Operating temperature: - 20 to 120°C

Protection: IP65

Service lifetime: 50 000 hours

Dimming: yes (dimmer is not included)

Power cable: no

ACCESSORIES

Optic fibers, LED projector OP2 (CW / WW / NW / RGB / RGBW), power supply, glue, drills, RGB (RGBW) controller in the case of multicolour version, paper template (optional).

Optic fibre sets offer an ideal solution for the creation of your own piece of starry sky.

They serve for decorative illumination of interior spaces such as bedrooms, bathrooms, living rooms, wellness resorts, saunas, bars and restaurants. They are suitable for application onto plasterboard ceilings or chipboards.

A set consisting of 230 fibers is suitable for application on a surface with parameters 2 x 1 m. 

Optic starry sky contains:

230 optic fibres with 3 different diameters

LED projector OP2, 12V

power supply

RGB (RGBW) controller in case of multicolour version

drills

glue

printed paper templates (optional)

Structure of optic fibers 

Length of 2 m – ø 0,75 mm – 100 pcs.

Length of 2 m – ø 1,00 mm – 10 pcs.

Length of 2 m – ø 1,50 mm – 5 pcs.

Length of 3 m – ø 0,75 mm – 100 pcs.

Length of 3 m – ø 1,00 mm – 10 pcs.

Length of 3 m – ø 1,50 mm – 5 pcs

TIP: 

You can add more variety to your starry sky via a combination of the CW (WW) projector with the RGB (RGBW) projector. We recommend connecting 70% of optic fibers to the CW (WW) projector and 30% of optic fibers equally selected from the whole surface to the RGB (RGBW) projector. What you need to do is to purchase one complete RGB (RGBW) set and one individual CW (WW) projector. It is recommended to select the CW projector instead of the WW projector in order to achieve a more realistic image.

A fancy effect can also be achieved via a combination of the optic and the crystal starry sky variant. The LED Crystal collection comes with various lights manufactured with authentic crystals from Swarovski.

If the standard set does not fit your needs, a customized set can be delivered. For this purpose, please send us the following information:

§  parameters of the room (area) where the starry sky is to be applied (length x width)

§  precise position of the service opening where the LED projector and the power supply are to be installed

§  optic set version (CW / NW / WW / RGB / RGBW)

We can also design and deliver a customized starry sky layout plan in the form of a printed paper template which can be easily mounted onto the ceiling in order to perform drilling.

TECHNICAL SPECIFICATION

Input voltage: 230V AC / 50-60 Hz

Power consumption: 5W (CW / NW /WW / RGB ), 6W (RGBW)

Light source: LED module made by CREE

Colour temperature: 6000K / 4000K / 3000K / RGB /RGBW

Operating temperature: - 20 to 120°C

Protection: IP65

Service lifetime: 50 000 hours

Dimming: yes (dimmer is not included)

Power cable: no

ACCESSORIES

Optic fibers, LED projector OP2 (CW / WW / NW / RGB / RGBW), power supply, glue, drills, RGB (RGBW) controller in the case of multicolour version, paper template (optional).

Optic fibre sets offer an ideal solution for the creation of your own piece of starry sky.

They serve for decorative illumination of interior spaces such as bedrooms, bathrooms, living rooms, wellness resorts, saunas, bars and restaurants. They are suitable for application onto plasterboard ceilings or chipboards.

A set consisting of 230 fibers is suitable for application on a surface with parameters 2 x 1 m. 

Optic starry sky contains:

230 optic fibres with 3 different diameters

LED projector OP2, 12V

power supply

RGB (RGBW) controller in case of multicolour version

drills

glue

printed paper templates (optional)

Structure of optic fibers 

Length of 2 m – ø 0,75 mm – 100 pcs.

Length of 2 m – ø 1,00 mm – 10 pcs.

Length of 2 m – ø 1,50 mm – 5 pcs.

Length of 3 m – ø 0,75 mm – 100 pcs.

Length of 3 m – ø 1,00 mm – 10 pcs.

Length of 3 m – ø 1,50 mm – 5 pcs

TIP: 

You can add more variety to your starry sky via a combination of the CW (WW) projector with the RGB (RGBW) projector. We recommend connecting 70% of optic fibers to the CW (WW) projector and 30% of optic fibers equally selected from the whole surface to the RGB (RGBW) projector. What you need to do is to purchase one complete RGB (RGBW) set and one individual CW (WW) projector. It is recommended to select the CW projector instead of the WW projector in order to achieve a more realistic image.

A fancy effect can also be achieved via a combination of the optic and the crystal starry sky variant. The LED Crystal collection comes with various lights manufactured with authentic crystals from Swarovski.

If the standard set does not fit your needs, a customized set can be delivered. For this purpose, please send us the following information:

§  parameters of the room (area) where the starry sky is to be applied (length x width)

§  precise position of the service opening where the LED projector and the power supply are to be installed

§  optic set version (CW / NW / WW / RGB / RGBW)

We can also design and deliver a customized starry sky layout plan in the form of a printed paper template which can be easily mounted onto the ceiling in order to perform drilling.

TECHNICAL SPECIFICATION

Input voltage: 230V AC / 50-60 Hz

Power consumption: 5W (CW / NW /WW / RGB ), 6W (RGBW)

Light source: LED module made by CREE

Colour temperature: 6000K / 4000K / 3000K / RGB /RGBW

Operating temperature: - 20 to 120°C

Protection: IP65

Service lifetime: 50 000 hours

Dimming: yes (dimmer is not included)

Power cable: no

ACCESSORIES

Optic fibers, LED projector OP2 (CW / WW / NW / RGB / RGBW), power supply, glue, drills, RGB (RGBW) controller in the case of multicolour version, paper template (optional).

Optic fibre sets offer an ideal solution for the creation of your own piece of starry sky.

They serve for decorative illumination of interior spaces such as bedrooms, bathrooms, living rooms, wellness resorts, saunas, bars and restaurants. They are suitable for application onto plasterboard ceilings or chipboards.

A set consisting of 230 fibers is suitable for application on a surface with parameters 2 x 1 m. 

Optic starry sky contains:

230 optic fibres with 3 different diameters

LED projector OP2, 12V

power supply

RGB (RGBW) controller in case of multicolour version

drills

glue

printed paper templates (optional)

Structure of optic fibers 

Length of 2 m – ø 0,75 mm – 100 pcs.

Length of 2 m – ø 1,00 mm – 10 pcs.

Length of 2 m – ø 1,50 mm – 5 pcs.

Length of 3 m – ø 0,75 mm – 100 pcs.

Length of 3 m – ø 1,00 mm – 10 pcs.

Length of 3 m – ø 1,50 mm – 5 pcs

TIP: 

You can add more variety to your starry sky via a combination of the CW (WW) projector with the RGB (RGBW) projector. We recommend connecting 70% of optic fibers to the CW (WW) projector and 30% of optic fibers equally selected from the whole surface to the RGB (RGBW) projector. What you need to do is to purchase one complete RGB (RGBW) set and one individual CW (WW) projector. It is recommended to select the CW projector instead of the WW projector in order to achieve a more realistic image.

A fancy effect can also be achieved via a combination of the optic and the crystal starry sky variant. The LED Crystal collection comes with various lights manufactured with authentic crystals from Swarovski.

If the standard set does not fit your needs, a customized set can be delivered. For this purpose, please send us the following information:

§  parameters of the room (area) where the starry sky is to be applied (length x width)

§  precise position of the service opening where the LED projector and the power supply are to be installed

§  optic set version (CW / NW / WW / RGB / RGBW)

We can also design and deliver a customized starry sky layout plan in the form of a printed paper template which can be easily mounted onto the ceiling in order to perform drilling.

TECHNICAL SPECIFICATION

Input voltage: 230V AC / 50-60 Hz

Power consumption: 5W (CW / NW /WW / RGB ), 6W (RGBW)

Light source: LED module made by CREE

Colour temperature: 6000K / 4000K / 3000K / RGB /RGBW

Operating temperature: - 20 to 120°C

Protection: IP65

Service lifetime: 50 000 hours

Dimming: yes (dimmer is not included)

Power cable: no

ACCESSORIES

Optic fibers, LED projector OP2 (CW / WW / NW / RGB / RGBW), power supply, glue, drills, RGB (RGBW) controller in the case of multicolour version, paper template (optional).

Sets consisting of lights from the LED Crystal collection are a unique solution to create your own piece of sky with shining stars. They serve for decorative illumination of premium spaces such as wellness resorts, saunas, bars, restaurants and other interiors. Due to their energy efficiency these lights are also well-suited to provide orientation lighting in common areas such as hallways.

This set consists of two types of lights from the LED Crystal collection - DROP 18, DROP 40 and DROP 50. Uniquely ground crystals diffuse spot light to create a fancy effect of gorgeously shining stars. The product marking “Made with crystals from Swarovski®” confirms that these lights have been manufactured with authentic crystals from Swarovski.

Light bodies are made of stainless steel and come in two workmanship variants – a polished stainless steel and golden gloss. Every light is equipped with a special holder for easy installation in plasterboard ceilings or chipboards and with a connector for quick coupling. The connector permits using the lights from the LED Crystal collection interchangeably during installation.

Crystal starry sky consists of:

LED Crystal – DROP 18 – 2 pcs.

LED Crystal – DROP 40 – 2 pcs.

LED Crystal – DROP 50 – 2 pcs.

Plastic mounting holders – 6 pcs.

Conductors with length of 2 m – 6 pcs.

Distribution block

Power supply

Drill ø 11 mm

Tip:

To achieve a perfect visual effect it is recommended to space 2 - 5 lights per 1 m². DROP 18 and DROP 40 project a star with a diameter of about 35 cm and DROP 50 of about 120 cm. Lights should be applied on light-coloured surfaces and they stand out best on a white ceiling.

We are ready to provide a layout plan of the starry sky on request according to the parameters of your interior.

TECHNICAL SPECIFICATION

Input voltage – set: 230V AC / 50-60 Hz

Input voltage – LED Crystal: 5V DC

Power consumption – LED Crystal: 0,15W

Light source: LED

Light colour: 8500 – 6500K (cool white)

Operating temperature: - 20 to 120 °C

Protection: IP65

Service lifetime: 50 000 hours

Dimming: no

Power cable: yes – cable with connector

ACCESSORIES

Plastic mounting holders, conductors, distribution block, drill and power supply.

Sets consisting of lights from the LED Crystal collection are a unique solution to create your own piece of sky with shining stars. They serve for decorative illumination of premium spaces such as wellness resorts, saunas, bars, restaurants and other interiors. Due to their energy efficiency these lights are also well-suited to provide orientation lighting in common areas such as hallways.

This set consists of two types of lights from the LED Crystal collection - DROP 18, DROP 40 and DROP 63. Uniquely ground crystals diffuse spot light to create a fancy effect of gorgeously shining stars. The product marking “Made with crystals from Swarovski®” confirms that these lights have been manufactured with authentic crystals from Swarovski.

Light bodies are made of stainless steel and come in two workmanship variants – a polished stainless steel and golden gloss. Every light is equipped with a special holder for easy installation in plasterboard ceilings or chipboards and with a connector for quick coupling. The connector permits using the lights from the LED Crystal collection interchangeably during installation.

Crystal starry sky consists of:

LED Crystal – DROP 18 – 2 pcs.

LED Crystal – DROP 40 – 2 pcs.

LED Crystal – DROP 63 – 2 pcs.

Plastic mounting holders – 6 pcs.

Conductors with length of 2 m – 6 pcs.

Distribution block

Power supply

Drill ø 11 mm

Tip:

To achieve a perfect visual effect it is recommended to space 2 - 5 lights per 1 m². DROP 18 and DROP 40 project a star with a diameter of about 35 cm and DROP 63 of about 45 cm. Lights should be applied on light-coloured surfaces and they stand out best on a white ceiling.

We are ready to provide a layout plan of the starry sky on request according to the parameters of your interior.

TECHNICAL SPECIFICATION

Input voltage – set: 230V AC / 50-60 Hz

Input voltage – LED Crystal: 5V DC

Power consumption – LED Crystal: 0,15W

Light source: LED

Light colour: 8500 – 6500K (cool white)

Operating temperature: - 20 to 120 °C

Protection: IP65

Service lifetime: 50 000 hours

Dimming: no

Power cable: yes – cable with connector

ACCESSORIES

Plastic mounting holders, conductors, distribution block, drill and power supply.

Sets consisting of lights from the LED Crystal collection are a unique solution to create your own piece of sky with shining stars. They serve for decorative illumination of premium spaces such as wellness resorts, saunas, bars, restaurants and other interiors. Due to their energy efficiency these lights are also well-suited to provide orientation lighting in common areas such as hallways.

Sets consisting of lights from the LED Crystal collection are a unique solution to create your own piece of sky with shining stars. They serve for decorative illumination of premium spaces such as wellness resorts, saunas, bars, restaurants and other interiors. Due to their energy efficiency these lights are also well-suited to provide orientation lighting in common areas such as hallways.

This set consists of two types of lights from the LED Crystal collection - DROP 18 and DROP 40. Uniquely ground crystals diffuse spot light to create a fancy effect of gorgeously shining stars. The product marking “Made with crystals from Swarovski®” confirms that these lights have been manufactured with authentic crystals from Swarovski.

Light bodies are made of stainless steel and come in two workmanship variants – a polished stainless steel and golden gloss. Every light is equipped with a special holder for easy installation in plasterboard ceilings or chipboards and with a connector for quick coupling. The connector permits using the lights from the LED Crystal collection interchangeably during installation.

Crystal starry sky consists of:

LED Crystal – DROP 18 – 3 pcs.

LED Crystal – DROP 40 – 3 pcs.

Plastic mounting holders – 6 pcs.

Conductors with length of 2 m – 6 pcs.

Distribution block

Power supply

Drill ø 11 mm

Tip:

To achieve a perfect visual effect it is recommended to space 2 - 5 lights per 1 m². DROP 18 and DROP 40 project a star with a diameter of about 35 cm. Lights should be applied on light-coloured surfaces and they stand out best on a white ceiling.

A fancy starry sky effect can be achieved via a combination of several types of shining stars. We recommend a combination with the ratio 45 % - DROP 18, 45 % - DROP 40 and 10 % LED Crystal projecting a larger star (DROP 50, DROP 63, DROP 100, SPIN DROP).

We are ready to provide a layout plan of the starry sky on request according to the parameters of your interior.

TECHNICAL SPECIFICATION

Input voltage – set: 230V AC / 50-60 Hz

Input voltage – LED Crystal: 5V DC

Power consumption – LED Crystal: 0,15W

Light source: LED

Light colour: 8500 – 6500K (cool white)

Operating temperature: - 20 to 120 °C

Protection: IP65

Service lifetime: 50 000 hours

Dimming: no

Power cable: yes – cable with connector

ACCESSORIES

Plastic mounting holders, conductors, distribution block, drill and a power supply.

Optic fibre sets offer an ideal solution for the creation of your own piece of starry sky.

They serve for decorative illumination of interior spaces such as bedrooms, bathrooms, living rooms, wellness resorts, saunas, bars and restaurants. They are suitable for application onto plasterboard ceilings or chipboards.

A set consisting of 230 fibers is suitable for application on a surface with parameters 2 x 1 m. 

Optic starry sky contains:

230 optic fibres with 3 different diameters

LED projector OP2, 12V

power supply

RGB (RGBW) controller in case of multicolour version

drills

glue

printed paper templates (optional)

Structure of optic fibers 

Length of 2 m – ø 0,75 mm – 100 pcs.

Length of 2 m – ø 1,00 mm – 10 pcs.

Length of 2 m – ø 1,50 mm – 5 pcs.

Length of 3 m – ø 0,75 mm – 100 pcs.

Length of 3 m – ø 1,00 mm – 10 pcs.

Length of 3 m – ø 1,50 mm – 5 pcs

TIP: 

You can add more variety to your starry sky via a combination of the CW (WW) projector with the RGB (RGBW) projector. We recommend connecting 70% of optic fibers to the CW (WW) projector and 30% of optic fibers equally selected from the whole surface to the RGB (RGBW) projector. What you need to do is to purchase one complete RGB (RGBW) set and one individual CW (WW) projector. It is recommended to select the CW projector instead of the WW projector in order to achieve a more realistic image.

A fancy effect can also be achieved via a combination of the optic and the crystal starry sky variant. The LED Crystal collection comes with various lights manufactured with authentic crystals from Swarovski.

If the standard set does not fit your needs, a customized set can be delivered. For this purpose, please send us the following information:

§  parameters of the room (area) where the starry sky is to be applied (length x width)

§  precise position of the service opening where the LED projector and the power supply are to be installed

§  optic set version (CW / NW / WW / RGB / RGBW)

We can also design and deliver a customized starry sky layout plan in the form of a printed paper template which can be easily mounted onto the ceiling in order to perform drilling.

TECHNICAL SPECIFICATION

Input voltage: 230V AC / 50-60 Hz

Power consumption: 5W (CW / NW /WW / RGB ), 6W (RGBW)

Light source: LED module made by CREE

Colour temperature: 6000K / 4000K / 3000K / RGB /RGBW

Operating temperature: - 20 to 120°C

Protection: IP65

Service lifetime: 50 000 hours

Dimming: yes (dimmer is not included)

Power cable: no

ACCESSORIES

Optic fibers, LED projector OP2 (CW / WW / NW / RGB / RGBW), power supply, glue, drills, RGB (RGBW) controller in the case of multicolour version, paper template (optional).

 Optic fibre sets offer an ideal solution for the creation of your own piece of starry sky.

They serve for decorative illumination of interior spaces such as bedrooms, bathrooms, living rooms, wellness resorts, saunas, bars and restaurants. They are suitable for application onto plasterboard ceilings or chipboards.

A set consisting of 330 fibers is suitable for application on a surface with parameters 2 x 1,5 m. 

Optic starry sky contains:

330 optic fibres with 3 different diameters

LED projector OP2, 12V

power supply

RGB (RGBW) controller in case of multicolour version

drills

glue

printed paper templates (optional)

Structure of optic fibers 

Length of 2,5 m – ø 0,75 mm – 150 pcs.

Length of 2,5 m – ø 1,00 mm – 10 pcs.

Length of 2,5 m – ø 1,50 mm – 5 pcs.

Length of 3,5 m – ø 0,75 mm – 150 pcs.

Length of 3,5 m – ø 1,00 mm – 10 pcs.

Length of 3,5 m – ø 1,50 mm – 5 pcs.

TIP: 

You can add more variety to your starry sky via a combination of the CW (WW) projector with the RGB (RGBW) projector. We recommend connecting 70% of optic fibers to the CW (WW) projector and 30% of optic fibers equally selected from the whole surface to the RGB (RGBW) projector. What you need to do is to purchase one complete RGB (RGBW) set and one individual CW (WW) projector. It is recommended to select the CW projector instead of the WW projector in order to achieve a more realistic image.

A fancy effect can also be achieved via a combination of the optic and the crystal starry sky variant. The LED Crystal collection comes with various lights manufactured with authentic crystals from Swarovski.

If the standard set does not fit your needs, a customized set can be delivered. For this purpose, please send us the following information:

§  parameters of the room (area) where the starry sky is to be applied (length x width)

§  precise position of the service opening where the LED projector and the power supply are to be installed

§  optic set version (CW / NW / WW / RGB / RGBW)

We can also design and deliver a customized starry sky layout plan in the form of a printed paper template which can be easily mounted onto the ceiling in order to perform drilling.

TECHNICAL SPECIFICATION

Input voltage: 230V AC / 50-60 Hz

Power consumption: 5W (CW / NW /WW / RGB ), 6W (RGBW)

Light source: LED module made by CREE

Colour temperature: 6000K / 4000K / 3000K / RGB /RGBW

Operating temperature: - 20 to 120°C

Protection: IP65

Service lifetime: 50 000 hours

Dimming: yes (dimmer is not included)

Power cable: no

ACCESSORIES

Optic fibers, LED projector OP2 (CW / WW / NW / RGB / RGBW), power supply, glue, drills, RGB (RGBW) controller in the case of multicolour version, paper template (optional).

Optic fibre sets offer an ideal solution for the creation of your own piece of starry sky.

They serve for decorative illumination of interior spaces such as bedrooms, bathrooms, living rooms, wellness resorts, saunas, bars and restaurants. They are suitable for application onto plasterboard ceilings or chipboards.

A set consisting of 400 fibers is suitable for application on a surface with parameters 3 x 1,5 m. 

Optic starry sky contains:

400 optic fibres with 3 different diameters

LED projector OP2, 12V

power supply

RGB (RGBW) controller in case of multicolour version

drills

glue

printed paper templates (optional)

Structure of optic fibers 

Length of 3 m – ø 0,75 mm – 180 pcs.

Length of 3 m – ø 1,00 mm – 10 pcs.

Length of 3 m – ø 1,50 mm – 10 pcs.

Length of 4 m – ø 0,75 mm – 180 pcs.

Length of 4 m – ø 1,00 mm – 10 pcs.

Length of 4 m – ø 1,50 mm – 10 pcs.

TIP: 

You can add more variety to your starry sky via a combination of the CW (WW) projector with the RGB (RGBW) projector. We recommend connecting 70% of optic fibers to the CW (WW) projector and 30% of optic fibers equally selected from the whole surface to the RGB (RGBW) projector. What you need to do is to purchase one complete RGB (RGBW) set and one individual CW (WW) projector. It is recommended to select the CW projector instead of the WW projector in order to achieve a more realistic image.

A fancy effect can also be achieved via a combination of the optic and the crystal starry sky variant. The LED Crystal collection comes with various lights manufactured with authentic crystals from Swarovski.

If the standard set does not fit your needs, a customized set can be delivered. For this purpose, please send us the following information:

§  parameters of the room (area) where the starry sky is to be applied (length x width)

§  precise position of the service opening where the LED projector and the power supply are to be installed

§  optic set version (CW / NW / WW / RGB / RGBW)

We can also design and deliver a customized starry sky layout plan in the form of a printed paper template which can be easily mounted onto the ceiling in order to perform drilling.

TECHNICAL SPECIFICATION

Input voltage: 230V AC / 50-60 Hz

Power consumption: 5W (CW / NW /WW / RGB ), 6W (RGBW)

Light source: LED module made by CREE

Colour temperature: 6000K / 4000K / 3000K / RGB /RGBW

Operating temperature: - 20 to 120°C

Protection: IP65

Service lifetime: 50 000 hours

Dimming: yes (dimmer is not included)

Power cable: no

ACCESSORIES

Optic fibers, LED projector OP2 (CW / WW / NW / RGB / RGBW), power supply, glue, drills, RGB (RGBW) controller in the case of multicolour version, paper template (optional).

Optic fibre sets offer an ideal solution for the creation of your own piece of starry sky.

They serve for decorative illumination of interior spaces such as bedrooms, bathrooms, living rooms, wellness resorts, saunas, bars and restaurants. They are suitable for application onto plasterboard ceilings or chipboards.

A set consisting of 550 fibers is suitable for application on a surface with parameters 3 x 2 m. 

Optic starry sky contains:

550 optic fibres with 3 different diameters

LED projector OP2, 12V

power supply

RGB (RGBW) controller in case of multicolour version

drills

glue

printed paper templates (optional)

Structure of optic fibers 

Length of 3 m – ø 0,75 mm – 255 pcs.

Length of 3 m – ø 1,00 mm – 10 pcs.

Length of 3 m – ø 1,50 mm – 10 pcs.

Length of 5 m – ø 0,75 mm – 255 pcs.

Length of 5 m – ø 1,00 mm – 10 pcs.

Length of 5 m – ø 1,50 mm – 10 pcs.

TIP: 

You can add more variety to your starry sky via a combination of the CW (WW) projector with the RGB (RGBW) projector. We recommend connecting 70% of optic fibers to the CW (WW) projector and 30% of optic fibers equally selected from the whole surface to the RGB (RGBW) projector. What you need to do is to purchase one complete RGB (RGBW) set and one individual CW (WW) projector. It is recommended to select the CW projector instead of the WW projector in order to achieve a more realistic image.

A fancy effect can also be achieved via a combination of the optic and the crystal starry sky variant. The LED Crystal collection comes with various lights manufactured with authentic crystals from Swarovski.

If the standard set does not fit your needs, a customized set can be delivered. For this purpose, please send us the following information:

§  parameters of the room (area) where the starry sky is to be applied (length x width)

§  precise position of the service opening where the LED projector and the power supply are to be installed

§  optic set version (CW / NW / WW / RGB / RGBW)

We can also design and deliver a customized starry sky layout plan in the form of a printed paper template which can be easily mounted onto the ceiling in order to perform drilling.

TECHNICAL SPECIFICATION

Input voltage: 230V AC / 50-60 Hz

Power consumption: 5W (CW / NW /WW / RGB ), 6W (RGBW)

Light source: LED module made by CREE

Colour temperature: 6000K / 4000K / 3000K / RGB /RGBW

Operating temperature: - 20 to 120°C

Protection: IP65

Service lifetime: 50 000 hours

Dimming: yes (dimmer is not included)

Power cable: no

ACCESSORIES

Optic fibers, LED projector OP2 (CW / WW / NW / RGB / RGBW), power supply, glue, drills, RGB (RGBW) controller in the case of multicolour version, paper template (optional).

Optic fibre sets offer an ideal solution for the creation of your own piece of starry sky.

They serve for decorative illumination of interior spaces such as bedrooms, bathrooms, living rooms, wellness resorts, saunas, bars and restaurants. They are suitable for application onto plasterboard ceilings or chipboards.

A set consisting of 700 fibers is suitable for application on a surface with parameters 3 x 3 m. 

Optic starry sky contains:

700 optic fibers with 3 different diameters

LED projector OP1, 24V

power supply

RGB (RGBW) controller in case of multicolour version

drills

glue

printed paper templates (optional)

Structure of optic fibers 

Length of 4 m – ø 0,75 mm – 320 pcs.

Length of 4 m – ø 1,00 mm – 15 pcs.

Length of 4 m – ø 1,50 mm – 15 pcs.

Length of 6 m – ø 0,75 mm – 320 pcs.

Length of 6 m – ø 1,00 mm – 15 pcs.

Length of 6 m – ø 1,50 mm – 15 pcs.

TIP: 

You can add more variety to your starry sky via a combination of the CW (WW) projector with the RGB (RGBW) projector. We recommend connecting 70% of optic fibers to the CW (WW) projector and 30% of optic fibers equally selected from the whole surface to the RGB (RGBW) projector. What you need to do is to purchase one complete RGB (RGBW) set and one individual CW (WW) projector. It is recommended to select the CW projector instead of the WW projector in order to achieve a more realistic image.

A fancy effect can also be achieved via a combination of the optic and the crystal starry sky variant. The LED Crystal collection comes with various lights manufactured with authentic crystals from Swarovski.

If the standard set does not fit your needs, a customized set can be delivered. For this purpose, please send us the following information:

§  parameters of the room (area) where the starry sky is to be applied (length x width)

§  precise position of the service opening where the LED projector and the power supply are to be installed

§  optic set version (CW / NW / WW / RGB / RGBW)

We can also design and deliver a customized starry sky layout plan in the form of a printed paper template which can be easily mounted onto the ceiling in order to perform drilling.

TECHNICAL SPECIFICATION

Input voltage: 230V AC / 50-60 Hz

Power consumption: 16W (CW / NW /WW / RGBW), 11W (RGB)

Light source: LED module made by CREE

Colour temperature: 6000K / 4000K / 3000K / RGB /RGBW

Operating temperature: - 20 to 120°C

Protection: IP65

Service lifetime: 50 000 hours

Dimming: yes (dimmer is not included)

Power cable: no

ACCESSORIES

Optic fibers, LED projector OP1 (CW / WW / NW / RGB / RGBW), power supply, glue, drills, RGB (RGBW) controller in the case of multicolour version, paper template (optional).

Optic fibre sets offer an ideal solution for the creation of your own piece of starry sky.

They serve for decorative illumination of interior spaces such as bedrooms, bathrooms, living rooms, wellness resorts, saunas, bars and restaurants. They are suitable for application onto plasterboard ceilings or chipboards.

A set consisting of 800 fibers is suitable for application on a surface with parameters 4 x 3 m. 

Optic starry sky contains:

800 optic fibers with 3 different diameters

LED projector OP1, 24V

power supply

RGB (RGBW) controller in case of multicolour version

drills

glue

printed paper templates (optional)

Structure of optic fibers 

Length of 3 m – ø 0,75 mm – 160 pcs.

Length of 3 m – ø 1,00 mm – 10 pcs.

Length of 3 m – ø 1,50 mm – 10 pcs.

Length of 4,5 m – ø 0,75 mm – 400 pcs.

Length of 4,5 m – ø 1,00 mm – 20 pcs.

Length of 4,5 m – ø 1,50 mm – 20 pcs.

Length of 6 m – ø 0,75 mm – 160 pcs.

Length of 6 m – ø 1,00 mm – 10 pcs.

Length of 6 m – ø 1,50 mm – 10 pcs.

TIP: 

You can add more variety to your starry sky via a combination of the CW (WW) projector with the RGB (RGBW) projector. We recommend connecting 70% of optic fibers to the CW (WW) projector and 30% of optic fibers equally selected from the whole surface to the RGB (RGBW) projector. What you need to do is to purchase one complete RGB (RGBW) set and one individual CW (WW) projector. It is recommended to select the CW projector instead of the WW projector in order to achieve a more realistic image.

A fancy effect can also be achieved via a combination of the optic and the crystal starry sky variant. The LED Crystal collection comes with various lights manufactured with authentic crystals from Swarovski.

If the standard set does not fit your needs, a customized set can be delivered. For this purpose, please send us the following information:

§  parameters of the room (area) where the starry sky is to be applied (length x width)

§  precise position of the service opening where the LED projector and the power supply are to be installed

§  optic set version (CW / NW / WW / RGB / RGBW)

We can also design and deliver a customized starry sky layout plan in the form of a printed paper template which can be easily mounted onto the ceiling in order to perform drilling.

TECHNICAL SPECIFICATION

Input voltage: 230V AC / 50-60 Hz

Power consumption: 16W (CW / NW /WW / RGBW), 11W (RGB)

Light source: LED module made by CREE

Colour temperature: 6000K / 4000K / 3000K / RGB /RGBW

Operating temperature: - 20 to 120°C

Protection: IP65

Service lifetime: 50 000 hours

Dimming: yes (dimmer is not included)

Power cable: no

ACCESSORIES

Optic fibers, LED projector OP1 (CW / WW / NW / RGB / RGBW), power supply, glue, drills, RGB (RGBW) controller in the case of multicolour version, paper template (optional).

Optic fibre sets offer an ideal solution for the creation of your own piece of starry sky.

They serve for decorative illumination of interior spaces such as bedrooms, bathrooms, living rooms, wellness resorts, saunas, bars and restaurants. They are suitable for application onto plasterboard ceilings or chipboards.

A set consisting of 900 fibers is suitable for application on a surface with parameters 5 x 3 m. 

Optic starry sky contains:

900 optic fibers with 3 different diameters

LED projector OP1, 24V

power supply

RGB (RGBW) controller in case of multicolour version

drills

glue

printed paper templates (optional)

Structure of optic fibers 

Length of 3 m – ø 0,75 mm – 150 pcs.

Length of 3 m – ø 1,00 mm – 5 pcs.

Length of 3 m – ø 1,50 mm – 5 pcs.

Length of 5 m – ø 0,75 mm – 300 pcs.

Length of 5 m – ø 1,00 mm – 20 pcs.

Length of 5 m – ø 1,50 mm – 20 pcs.

Length of 7 m – ø 0,75 mm – 350 pcs.

Length of 7 m – ø 1,00 mm – 25 pcs.

Length of 7 m – ø 1,50 mm – 25 pcs.

TIP: 

You can add more variety to your starry sky via a combination of the CW (WW) projector with the RGB (RGBW) projector. We recommend connecting 70% of optic fibers to the CW (WW) projector and 30% of optic fibers equally selected from the whole surface to the RGB (RGBW) projector. What you need to do is to purchase one complete RGB (RGBW) set and one individual CW (WW) projector. It is recommended to select the CW projector instead of the WW projector in order to achieve a more realistic image.

A fancy effect can also be achieved via a combination of the optic and the crystal starry sky variant. The LED Crystal collection comes with various lights manufactured with authentic crystals from Swarovski.

If the standard set does not fit your needs, a customized set can be delivered. For this purpose, please send us the following information:

§  parameters of the room (area) where the starry sky is to be applied (length x width)

§  precise position of the service opening where the LED projector and the power supply are to be installed

§  optic set version (CW / NW / WW / RGB / RGBW)

We can also design and deliver a customized starry sky layout plan in the form of a printed paper template which can be easily mounted onto the ceiling in order to perform drilling.

TECHNICAL SPECIFICATION

Input voltage: 230V AC / 50-60 Hz

Power consumption: 16W (CW / NW /WW / RGBW), 11W (RGB)

Light source: LED module made by CREE

Colour temperature: 6000K / 4000K / 3000K / RGB /RGBW

Operating temperature: - 20 to 120°C

Protection: IP65

Service lifetime: 50 000 hours

Dimming: yes (dimmer is not included)

Power cable: no

ACCESSORIES

Optic fibers, LED projector OP1 (CW / WW / NW / RGB / RGBW), power supply, glue, drills, RGB (RGBW) controller in the case of multicolour version, paper template (optional).

BRIOLETTE 100 is an independent light from the LED Crystal collection designed for the crystal starry sky.

This collection serves for decorative illumination of premium spaces such as wellness resorts, saunas, bars, restaurants and other types of interior. Due to their energy efficiency these lights are also well-suited to provide orientation lighting in common areas such as hallways. 

Uniquely ground crystals diffuse spot light to create a fancy effect of gorgeously shining stars. The product marking “Made with crystals from Swarovski®” confirms that these lights have been manufactured with authentic crystals from Swarovski.

Lights bodies are made of stainless steel and come in two workmanship variants – a polished stainless steel and golden gloss. Every light is equipped with a special holder for easy installation in plasterboard ceilings or chipboards and with a connector for quick coupling. The connector permits using the lights from the LED Crystal collection interchangeably during installation.

Tip:

BRIOLETTE 100 lights project a larger star with a diameter of about 180 cm. They are therefore suitable for application in larger spaces where it is sufficient to deploy 1 light per 3 m². They are an extraordinary option for orientation lighting in hallways.  

To achieve a perfect visual effect it is recommended to combine 2 types of shining stars - BRIOLETTE 76 and BRIOLETTE 100. 

Lights should be applied on light-coloured surfaces and they stand out best on a white ceiling.

We are ready to provide a layout plan of the starry sky on request according to the parameters of your interior.

TECHNICAL SPECIFICATION

Input voltage – LED Crystal: 5V DC

Power consumption – LED Crystal: 0,15W

Light source: LED

Light colour: 8500 – 6500K (cool white)

Operating temperature: - 20 to 120 °C

Protection: IP65

Service lifetime: 50 000 hours

Dimming: no

Power cable: yes – cable with connector

ACCESSORIES

For orders 1 - 5 lights – a plastic mounting holder, 2m conductor with a connector.

For orders with minimum of 6 lights - a plastic mounting holder, a conductor with a connector, distribution block, drill and a power supply.

BRIOLETTE 76 is an independent light from the LED Crystal collection designed for the crystal starry sky.

This collection serves for decorative illumination of premium spaces such as wellness resorts, saunas, bars, restaurants and other types of interior. Due to their energy efficiency these lights are also well-suited to provide orientation lighting in common areas such as hallways. 

Uniquely ground crystals diffuse spot light to create a fancy effect of gorgeously shining stars. The product marking “Made with crystals from Swarovski®” confirms that these lights have been manufactured with authentic crystals from Swarovski.

Lights bodies are made of stainless steel and come in two workmanship variants – a polished stainless steel and golden gloss. Every light is equipped with a special holder for easy installation in plasterboard ceilings or chipboards and with a connector for quick coupling. The connector permits using the lights from the LED Crystal collection interchangeably during installation.

Tip:

BRIOLETTE 76 lights project a larger star with a diameter of about 80 cm. They are therefore suitable for application in larger spaces where it is sufficient to deploy 1 light per 2 m². They are an extraordinary option for orientation lighting in hallways.  

To achieve a perfect visual effect it is recommended to combine 2 types of shining stars - BRIOLETTE 76 and BRIOLETTE 100. 

Lightsshould be applied on light-coloured surfaces and they stand out best on a white ceiling.

We are ready to provide a layout plan of the starry sky on request according to the parameters of your interior.

TECHNICAL SPECIFICATION

Input voltage – LED Crystal: 5V DC

Power consumption – LED Crystal: 0,15W

Light source: LED

Light colour: 8500 – 6500K (cool white)

Operating temperature: - 20 to 120 °C

Protection: IP65

Service lifetime: 50 000 hours

Dimming: no

Power cable: yes – cable with connector

ACCESSORIES

For orders 1 - 5 lights – a plastic mounting holder, 2m conductor with a connector.

For orders with minimum of 6 lights - a plastic mounting holder, a conductor with a connector, distribution block, drill and a power supply.

DROP 100 is an independent light from the LED Crystal collection designed for the crystal starry sky.

This collection serves for decorative illumination of premium spaces such as wellness resorts, saunas, bars, restaurants and other types of interior. Due to their energy efficiency these lights are also well-suited to provide orientation lighting in common areas such as hallways. 

Uniquely ground crystals diffuse spot light to create a fancy effect of gorgeously shining stars. The product marking “Made with crystals from Swarovski®” confirms that these lights have been manufactured with authentic crystals from Swarovski.

Lights bodies are made of stainless steel and come in two workmanship variants – a polished stainless steel and golden gloss. Every light is equipped with a special holder for easy installation in plasterboard ceilings or chipboards and with a connector for quick coupling. The connector permits using the lights from the LED Crystal collection interchangeably during installation.

Tip:

DROP 100 lights project a larger star with a diameter of about 160 cm. They are therefore suitable for application in larger spaces where it is sufficient to deploy 1 light per 3 m². They are an extraordinary option for orientation lighting in hallways.

A fancy effect can be achieved via a combination of lights LED Crystal with the ratio 45 % - DROP 18, 45 % - DROP 40 and 10 % - DROP 100. Alternatively, you can add other light types - DROP 50 and DROP 63.

Lights should be applied on light-coloured surfaces and they stand out best on a white ceiling.

We are ready to provide a layout plan of the starry sky on request according to the parameters of your interior.

TECHNICAL SPECIFICATION

Input voltage – LED Crystal: 5V DC

Power consumption – LED Crystal: 0,15W

Light source: LED

Light colour: 8500 – 6500K (cool white)

Operating temperature: - 20 to 120 °C

Protection: IP65

Service lifetime: 50 000 hours

Dimming: no

Power cable: yes – cable with connector

ACCESSORIES

For orders 1 - 5 lights – a plastic mounting holder, 2m conductor with a connector.

For orders with minimum of 6 lights - a plastic mounting holder, a conductor with a connector, distribution block, drill and a power supply.

DROP 40 is an independent light from the LED Crystal collection designed for the crystal starry sky.

This collection serves for decorative illumination of premium spaces such as wellness resorts, saunas, bars, restaurants and other types of interior. Due to their energy efficiency these lights are also well-suited to provide orientation lighting in common areas such as hallways. 

Uniquely ground crystals diffuse spot light to create a fancy effect of gorgeously shining stars. The product marking “Made with crystals from Swarovski®” confirms that these lights have been manufactured with authentic crystals from Swarovski.

Lights bodies are made of stainless steel and come in two workmanship variants – a polished stainless steel and a golden gloss. Every light is equipped with a special holder for easy installation in plasterboard ceilings or chipboards and with a connector for quick coupling. The connector permits using the lights from the LED Crystal collection interchangeably during installation.

Tip:

To achieve a perfect visual effect it is recommended to space 3 - 5 lights per 1 m².  DROP 40 projects star with a diameter of approximately 35 cm. 

Lights should be applied on light-coloured surfaces and they stand out best on a white ceiling.

A fancy starry sky effect can be achieved via a combination of several types of shining stars. We recommend a combination with the ratio  45 % - DROP 18, 45 % - DROP 40 and 10 % LED Crystal projecting a larger star (DROP 50, DROP 63, DROP 100, SPIN DROP).

We are ready to provide a layout plan of the starry sky on request according to the parameters of your interior.

TECHNICAL SPECIFICATION

Input voltage – LED Crystal: 5V DC

Power consumption – LED Crystal: 0,15W

Light source: LED

Light colour: 8500 – 6500K (cool white)

Operating temperature: - 20 to 120 °C

Protection: IP65

Service lifetime: 50 000 hours

Dimming: no

Power cable: yes – cable with connector

ACCESSORIES

For orders 1 - 5 lights – a plastic mounting holder, 2m conductor with a connector.

For orders with minimum of 6 lights - a plastic mounting holder, a conductor with connector, distribution block, drill and a power supply.

DROP 50 is an independent light from the LED Crystal collection designed for the crystal starry sky.

This collection serves for decorative illumination of premium spaces such as wellness resorts, saunas, bars, restaurants and other types of interior. Due to their energy efficiency these lights are also well-suited to provide orientation lighting in common areas such as hallways. 

Uniquely ground crystals diffuse spot light to create a fancy effect of gorgeously shining stars. The product marking “Made with crystals from Swarovski®” confirms that these lights have been manufactured with authentic crystals from Swarovski.

Lights bodies are made of stainless steel and come in two workmanship variants – a polished stainless steel and golden gloss. Every light is equipped with a special holder for easy installation in plasterboard ceilings or chipboards and with a connector for quick coupling. The connector permits using the lights from the LED Crystal collection interchangeably during installation.

Tip:

DROP 50 lights project a larger star with a diameter of about 120 cm. They are therefore suitable for application in larger spaces where it is sufficient to deploy 1 light per 2 m². They are an extraordinary option for orientation lighting in hallways. 

A fancy effect can be achieved via a combination of lights LED Crystal with the ratio 45 % - DROP 18,

45 % - DROP 40 and 10 % - DROP 50. Alternatively, you can add other light types - DROP 63 and

DROP 100.

Lights should be applied on light-coloured surfaces and they stand out best on a white ceiling.

We are ready to provide a layout plan of the starry sky on request according to the parameters of your interior.

TECHNICAL SPECIFICATION

Input voltage – LED Crystal: 5V DC

Power consumption – LED Crystal: 0,15W

Light source: LED

Light colour: 8500 – 6500K (cool white)

Operating temperature: - 20 to 120 °C

Protection: IP65

Service lifetime: 50 000 hours

Dimming: no

Power cable: yes – cable with connector

ACCESSORIES

For orders 1 - 5 lights – a plastic mounting holder, 2m conductor with a connector.

For orders with minimum of 6 lights - a plastic mounting holder, a conductor with a connector, distribution block, drill and a power supply.

DROP 63 is an independent light from the LED Crystal collection designed for the crystal starry sky.

This collection serves for decorative illumination of premium spaces such as wellness resorts, saunas, bars, restaurants and other types of interior. Due to their energy efficiency these lights are also well-suited to provide orientation lighting in common areas such as hallways. 

Uniquely ground crystals diffuse spot light to create a fancy effect of gorgeously shining stars. The product marking “Made with crystals from Swarovski®” confirms that these lights have been manufactured with authentic crystals from Swarovski.

Lights bodies are made of stainless steel and come in two workmanship variants – a polished stainless steel and golden gloss. Every light is equipped with a special holder for easy installation in plasterboard ceilings or chipboards and with a connector for quick coupling. The connector permits using the lights from the LED Crystal collection interchangeably during installation.

Tip:

To achieve a perfect visual effect it is recommended to space 2 - 3 lights per 1 m².  DROP 63 projects star with a diameter of approximately 45 cm. A fancy effect can be achieved via a combination of lights LED Crystal with the ratio 45 % - DROP 18, 45 % - DROP 40 and 10 % - DROP 63. Alternatively, you can add other light types - DROP 50 and DROP 100.

Lights should be applied on light-coloured surfaces and they stand out best on a white ceiling.

We are ready to provide a layout plan of the starry sky on request according to the parameters of your interior.

TECHNICAL SPECIFICATION

Input voltage – LED Crystal: 5V DC

Power consumption – LED Crystal: 0,15W

Light source: LED

Light colour: 8500 – 6500K (cool white)

Operating temperature: - 20 to 120 °C

Protection: IP65

Service lifetime: 50 000 hours

Dimming: no

Power cable: yes – cable with connector

ACCESSORIES

For orders 1 - 5 lights – a plastic mounting holder, 2m conductor with a connector.

For orders with minimum of 6 lights - a plastic mounting holder, a conductor with a connector, distribution block, drill and a power supply.

FLOW 100 is an independent light from the LED Crystal collection designed for the crystal starry sky.

This collection serves for decorative illumination of premium spaces such as wellness resorts, saunas, bars, restaurants and other types of interior. Due to their energy efficiency these lights are also well-suited to provide orientation lighting in common areas such as hallways. 

Uniquely ground crystals diffuse spot light to create a fancy effect of gorgeously shining stars. The product marking “Made with crystals from Swarovski®” confirms that these lights have been manufactured with authentic crystals from Swarovski.

Lights bodies are made of stainless steel and come in two workmanship variants – a polished stainless steel and golden gloss. Every light is equipped with a special holder for easy installation in plasterboard ceilings or chipboards and with a connector for quick coupling. The connector permits using the lights from the LED Crystal collection interchangeably during installation.

Tip:

To achieve a perfect visual effect it is recommended to space 2 - 3 lights per 1 m².  FLOW 100 lights project stars with a diameter of approximately 50 cm. A fancy starry sky effect can be achieved via a combination of 2 types of shining stars -  FLOW 63 and FLOW 100. 

Lights should be applied on light-coloured surfaces and they stand out best on a white ceiling.

We are ready to provide a layout plan of the starry sky on request according to the parameters of your interior.

TECHNICAL SPECIFICATION

Input voltage – LED Crystal: 5V DC

Power consumption – LED Crystal: 0,15W

Light source: LED

Light colour: 8500 – 6500K (cool white)

Operating temperature: - 20 to 120 °C

Protection: IP65

Service lifetime: 50 000 hours

Dimming: no

Power cable: yes – cable with connector

ACCESSORIES

For orders 1 - 5 lights – a plastic mounting holder, 2m conductor with a connector.

For orders with minimum of 6 lights - a plastic mounting holder, a conductor with a connector, distribution block, drill and a power supply.

FLOW 63 is an independent light from the LED Crystal collection designed for the crystal starry sky.

This collection serves for decorative illumination of premium spaces such as wellness resorts, saunas, bars, restaurants and other types of interior. Due to their energy efficiency these lights are also well-suited to provide orientation lighting in common areas such as hallways. 

Uniquely ground crystals diffuse spot light to create a fancy effect of gorgeously shining stars. The product marking “Made with crystals from Swarovski®” confirms that these lights have been manufactured with authentic crystals from Swarovski.

Lights bodies are made of stainless steel and come in two workmanship variants – a polished stainless steel and golden gloss. Every light is equipped with a special holder for easy installation in plasterboard ceilings or chipboards and with a connector for quick coupling. The connector permits using the lights from the LED Crystal collection interchangeably during installation.

Tip:

To achieve a perfect visual effect it is recommended to space 3 – 4 lights per 1 m².  FLOW 63 lights project stars with a diameter of approximately 30 cm. A fancy starry sky effect can be achieved via a combination of 2 types of shining stars -  FLOW 63 and FLOW 100. 

Lights should be applied on light-coloured surfaces and they stand out best on a white ceiling.

We are ready to provide a layout plan of the starry sky on request according to the parameters of your interior.

TECHNICAL SPECIFICATION

Input voltage – LED Crystal: 5V DC

Power consumption – LED Crystal: 0,15W

Light source: LED

Light colour: 8500 – 6500K (cool white)

Operating temperature: - 20 to 120 °C

Protection: IP65

Service lifetime: 50 000 hours

Dimming: no

Power cable: yes – cable with connector

ACCESSORIES

For orders 1 - 5 lights – a plastic mounting holder, 2m conductor with a connector.

For orders with minimum of 6 lights - a plastic mounting holder, a conductor with a connector, distribution block, drill and a power supply.

SPIN DROP is an independent light from the LED Crystal collection designed for the crystal starry sky.

This collection serves for decorative illumination of premium spaces such as wellness resorts, saunas, bars, restaurants and other types of interior. Due to their energy efficiency these lights are also well-suited to provide orientation lighting in common areas such as hallways. 

Uniquely ground crystals diffuse spot light to create a fancy effect of gorgeously shining stars. The product marking “Made with crystals from Swarovski®” confirms that these lights have been manufactured with authentic crystals from Swarovski.

Lights bodies are made of stainless steel and come in two workmanship variants – a polished stainless steel and golden gloss. Every light is equipped with a special holder for easy installation in plasterboard ceilings or chipboards and with a connector for quick coupling. The connector permits using the lights from the LED Crystal collection interchangeably during installation.

Tip:

SPIN DROP lights project a star with a diameter of about 40 cm. It is recommended to deploy 2 -3 lights per 1 m².  A fancy effect can be achieved via a combination of various LED Crystal lights with the ratio 45 % - DROP 18, 45 % - DROP 40 and 10 % - SPIN DROP.

Luminaires should be applied on light-coloured surfaces and they stand out best on a white ceiling. SPIN DROP is the only luminaire from the LED Crystal collection that stands out well also on darker surfaces.

We are ready to provide a layout plan of the starry sky on request according to the parameters of your interior.

TECHNICAL SPECIFICATION

Input voltage – LED Crystal: 5V DC

Power consumption – LED Crystal: 0,15W

Light source: LED

Light colour: 8500 – 6500K (cool white)

Operating temperature: - 20 to 120 °C

Protection: IP65

Service lifetime: 50 000 hours

Dimming: no

Power cable: yes – cable with connector

ACCESSORIES

For orders 1 - 5 lights – a plastic mounting holder, 2m conductor with a connector.

For orders with minimum of 6 lights - a plastic mounting holder, a conductor with a connector, distribution block, drill and a power supply.

LED projector is intended as a light source for optical fibers. The amount of fiber optics that can fit into the projector depends on the size of the cable gland.   

Cable gland D17 – max. 230 optical fibers

Cable gland D21 – max. 550 optical fibers

Cable gland D28 – max. 900 optical fibers

Optical fibers ratio: 90% : 5% : 5%  (ø0,75 mm : ø1 mm : ø1,5 mm)

The LED projector is available in 5 light variants: CW (cool white), NW (natural white), WW (warm white), RGB and RGBW. RGB and RGBW versions offer wide options for setting light effects. In addition to different colours, the RGBW projector allows you to set cool white (CW), warm white (WW) and natural white (NW).

RGB projector does not give you this option.

GENERAL SPECIFICATION

Material: aluminium                                                                              

Surface finish: black anodized          

Dimensions: ø 60 mm, length 150 mm                                                                             

Weight: 0,8 kg                                                                                          

Protection: IP41                                                                                                       

Operating temperature: -20 to 60 °C                                                               

Projector temperature: 63 °C*                                                           

TECHNICAL SPECIFICATION

Input voltage: 24V DC                                                                           

Power consumption: 16W (CW / NW / WW / RGBW), 11W (RGB)                             

Light source: LED modul brand LG                                                                     

Operative lifetime: 50 000 hours                                                       

Light color: 6000K / 4000K / 3000K / RGB / RGBW                                                      

Dimming: yes (control not included)                                                                 

*WARNING! The projector has a surface operating temperature of 63°C! It is necessary to choose such a location that prevents accidental contact  with people, animals and easily inflammable materials.

LED projector is intended as a light source for optical fibers. The amount of fiber optics that can fit into the projector depends on the size of the cable gland.   

Cable gland D17 – max. 230 optical fibers

Cable gland D21 – max. 550 optical fibers

Optical fibers ratio: 90% : 5% : 5%  (ø0,75 mm : ø1 mm : ø1,5 mm)

The LED projector is available in 5 light variants: CW (cool white), NW (natural white), WW (warm white), RGB and RGBW. RGB and RGBW versions offer wide options for setting light effects. In addition to different colours, the RGBW projector allows you to set cool white (CW), warm white (WW) and natural white (NW).

RGB projector does not give you this option.

GENERAL SPECIFICATION

Material: aluminium                                                                              

Surface finish: black anodized          

Dimensions: ø 40 mm, length 130 mm                                                                             

Weight: 0,4 kg                                                                                          

Protection: IP41                                                                                                       

Operating temperature: -20 to 60 °C                                                               

Projector temperature: 50 °C*                                                           

TECHNICAL SPECIFICATION

Input voltage: 12V DC                                                                           

Power consumption: 6W 

Light source: LED modul brand LG                                                                     

Operative lifetime: 50 000 hours                                                       

Light color: 6000K / 4000K / 3000K / RGB / RGBW                                                      

Dimming: yes (control not included)                                                                 

Power cable: yes                                                                                                                      

*WARNING! The projector has a surface operating temperature of 50°C! It is necessary to choose such a location that prevents accidental contact  with people, animals and easily inflammable materials.

LED STAR is an independent light from the LED Crystal collection designed for the starry sky.

This collection serves for decorative illumination of premium spaces such as wellness resorts, saunas, bars, restaurants and other types of interior. Due to their energy efficiency these luminaires are also well-suited to provide orientation lighting in common areas such as hallways. 

Lights bodies are made of stainless steel and come in two workmanship variants – a polished stainless steel and a golden gloss. Every light is equipped with a special holder for easy installation in plasterboard ceilings or chipboards and with a connector for quick coupling.

Tip:

LED STAR is suitable for applications in spaces with low ceilings (saunas), where there is no risk of injury compared to other cut lights of LED Crystal collection. To achieve a perfect visual effect it is recommended to space 3 - 6 lights per 1 m². 

We are ready to provide a layout plan of the starry sky on request according to the parameters of your interior.

TECHNICAL SPECIFICATION

Input voltage – LED STAR: 5V DC

Power consumption – LED STAR: 0,15W

Light source: LED

Light colour: 8500 – 6500K (cool white)

Operating temperature: - 20 to 120 °C

Protection: IP65

Service lifetime: 50 000 hours

Dimming: no

Power cable: yes – cable with connector

ACCESSORIES

For orders 1 - 5 lights – a plastic mounting holder, 2m conductor with a connector.

For orders with minimum of 6 lights - a plastic mounting holder, a conductor with a connector, distribution block, drill and a power supply.

Elegance and luxury best describe the lchandeliers from the crystal collection.

The beauty of chandelier Mikado stem from the use of thousands of tiny crystals that reflect light in unique ways, creating a sparkling effect. The marking "Made with crystals from Swarovski" on the product confirms that this jewel was made with authentic Swarovski crystals. The choice of high-quality crystals further enhance the luxurious feel of the chandelier.

TIP: Crystals stand out best with a cool white light source.

Chandeliers are supplied either with metal base, which is also suitable for concrete ceilings, or without a base (plasterboard ceilings). In this case, thin cables with glass components protrude directly from the ceiling from small gripers. Thanks to this, the chandelier acquire another dimension, as it acts as an integral part of the entire interior, tailor-made.

GENERAL SPECIFICATION

Metal base: polished stainless stee / white matt / no base

Base dimensions: 1600 x 600 x 40 mm (length x width x hight)

Glass components: tubes filled with Swarovski crystals                                                                                  

Components dimensions: ø 8 mm, lenght 150 mm

Components attachment: thin stainless steel cables                                                      

Components suspension: optional, min. 300 mm                         

TECHNICAL SPECIFICATION

Input voltage: 230V AC / 50-60 Hz                                                                     

Light source: 10 x LED spotlight DIAN     

Color temperature: 6000K / 4000K / 3000K

Power consumption: 60W

Operative lifetime: 50 000 hours    

Dimming: yes (control not included)                                                

Protection: IP20                                                                                                       

Operating temperature: - 10 to 50 °C                                              

Power cable: no

Ocean is a designer exterior light made of hand-blown glass in combination with polished stainless steel. The air bubbles caught in the glass subtly reflect the light into the space and create a pleasant evening atmosphere. With its design, Ocean is the jewel of any space, even during daylight.

The glass shade and stainless steel base are available in several heights. This create space for their variable use. Luminaires can be used as line lighting fore sidewalks or as lighting for garden areas with their irregular distribution. The glass shade stands out most in the cool white version.

TIP: We recommend grops of 2 to 3 lamps in different heights.

Luminaires are fixed to solid bases.

GENERAL SPECIFICATION

Shade: hand-blown glass

Body: polished stainless steel                                                                               

Lamp diameter: ø 80 mm

Shade height:  150 and 250 mm                                                                           

Body height: 150, 300 and 450 mm                                                                                    

Protection: IP65                                                                                                         

Operating temperature: - 30 to 60 °C                                                                

TECHNICAL SPECIFICATION

Input voltage: 24V DC (CW / NW / WW / RGBW)  

Input voltage: 230V AC (CW / NW / WW)                                                                           

Power consumption: 16W (input voltage 24V DC)                          

Power consumption: 9W (input voltage 230V AC)         

Light source: LED modul brand CREE / SEOUL                                                                                     

Operative lifetime: 50 000 hours                                                        

Color temperature: 6000K / 4000K / 3000K / RGBW                                                       

Dimming: yes – 24V DC (control not included)

Power cable: yes

ACCESSORIES

3 x screw Torx, 1 x key Torx 25 - fixed to solid bases

Ocean Art is a designer exterior light made of hand-blown glass in combination with a hand-forged stainless steel body. A patina is applied to the surface of the lamp, which gives the lamp a unique appearance with a rustic touch.  Thanks to the blacksmith work, the lamp fits perfectly even in more classically tuned spaces. Lamps can be used as line lighting fore sidewalks or as lighting for garden areas with their irregular distribution.

The air bubbles caught in the glass subtly reflect the light into the space and create a pleasant evening atmosphere. With its design, Ocean is the jewel of any space, even during daylight. The glass shade is available in 2 heights and it stands out most in the cool white version.